====== sfdisk ======
Display or manipulate a disk partition table.
====== Копирование таблицы разделов ======
Копирование таблицы разделов с имеющегося ''/dev/sdd'' на новый диск ''/dev/sdc''
sfdisk -d /dev/sdd –force | sfdisk /dev/sdc
sfdisk: Checking that no-one is using this disk right now ...
sfdisk: cannot open –force for reading: Нет такого файла или каталога
sfdisk: OK
Disk /dev/sdc: 121601 cylinders, 255 heads, 63 sectors/track
sfdisk: /dev/sdc: unrecognized partition table type
Old situation:
sfdisk: No partitions found
New situation:
Units: sectors of 512 bytes, counting from 0
Device Boot Start End #sectors Id System
/dev/sdc1 2048 1953523711 1953521664 fd Linux raid autodetect
/dev/sdc2 0 - 0 0 Empty
/dev/sdc3 0 - 0 0 Empty
/dev/sdc4 0 - 0 0 Empty
sfdisk: Warning: partition 1 does not end at a cylinder boundary
sfdisk: Warning: no primary partition is marked bootable (active)
This does not matter for LILO, but the DOS MBR will not boot this disk.
Successfully wrote the new partition table
Re-reading the partition table ...
sfdisk: If you created or changed a DOS partition, /dev/foo7, say, then use dd(1)
to zero the first 512 bytes: dd if=/dev/zero of=/dev/foo7 bs=512 count=1
(See fdisk(8).)
====== Ссылки ======
{{tag>Prepare_Storage_Device Linux}}