################################################################################################
## Configuration Template For GXP140x Firmware Version 1.0.5.26                               ##
################################################################################################

####################################################################
# Account Settings                                                ##
####################################################################

#-----------------------------------------
# Account 1/Network Settings
#-----------------------------------------
# DNS Mode. 0 - A Record, 1 - SRV, 2 - NAPTR/SRV, 3 - Use Configured IP. Default is 0
# Number: 0, 1, 2, 3
# Mandatory
P103 = 0

# Primary IP. Maximum 15 characters
# String
P2308 =

# Backup IP 1
# String
P2309 =

# Backup IP 2
# String
P2310 =

# NAT Traversal. 0 - No, 1 - STUN, 2 - keep alive, 3 - UPnP, 4 - Auto, 5 - VPN. Default is 0.
# Number: 0, 1, 2, 3, 4, 5
# Mandatory
P52 = 0

# Proxy-Require (A SIP extension to enable firewall penetration). Max length is 64 characters
# String
P197 =

#-----------------------------------------
# Account 1/SIP Settings/Basic Settings
#-----------------------------------------
# TEL URI. 0 - Disabled, 1 - User=Phone, 2 - Enabled. Default is 0
# Number: 0, 1, 2
# Mandatory
P63 = 0

# SIP Registration. 0 - No, 1 - Yes. Default is 1
# Number: 0, 1
# Mandatory
P31 = 1

# Unregister On Reboot. 0 - No, 1 - Yes. Default is 0
# Number: 0, 1
# Mandatory
P81 = 0

# Register Expiration (in minutes). Default is 60. Max about 45 days
# Number: 1 - 64800
# Mandatory
P32 = 60

# Reregister Before Expiration (in seconds). Default is 0 second
# Number: 0 - 64800
# Mandatory
P2330 = 0

# Local SIP Port. Default is 5060
# Number
# Mandatory
P40 = 5060

# SIP Registration Failure Retry Wait Time (in seconds). Default is 20
# Number: 1 - 3600
# Mandatory
P138 = 20

# SIP T1 Timeout. RFC 3261 T1 value (RTT estimate)
# 50 - 0.5 sec, 100 - 1 sec, 200 - 2 sec. Default is 50
# Number: 50, 100, 200
# Mandatory
P209 = 50

# SIP T2 Interval. RFC 3261 T2 value. The maximum retransmit interval for non-INVITE requests and INVITE responses
# 200 - 2 sec, 400 - 4 sec, 800 - 8 sec. Default is 400
# Number: 200, 400, 800
# Mandatory
P250 = 400

# SIP Transport. 0 - UDP, 1 - TCP, 2 - TLS/TCP. Default is 0
# Number: 0, 1, 2
# Mandatory
P130 = 0

# SIP URI Scheme when using TLS. 0 - sip, 1 - sips. Default is 1
# Number: 0, 1
# Mandatory
P2329 = 1

# Use Actual Ephemeral Port in Contact with TCP/TLS. 0 - No, 1 - Yes. Default is 0
# Number: 0, 1
# Mandatory
P2331 = 0

# Remove OBP from Route. 0 - No, 1 - Yes. Default is 0
# Number: 0, 1
# Mandatory
P2305 = 0

# Support SIP Instace ID. 0 - No, 1 - Yes. Default is 1
# Number: 0, 1
# Mandatory
P288 = 1

# SUBSCRIBE for MWI. 0 - No, 1 - Yes. Default is 0
# Number: 0, 1
# Mandatory
P99 = 0

# SUBSCRIBE for Registration. 0 - No, 1 - Yes. Default is 0
# Number: 0, 1
# Mandatory
P2319 = 0

# Enable 100rel. 0 - No, 1 - Yes. Default is 0
# Number: 0, 1
# Mandatory
P272 = 0

# Caller ID Display. 0 - Auto, 1 - Disabled, 2 - From Header. Default is 0
# Number: 0, 1, 2
# Mandatory
P2324 = 0

# Use Privacy Header
# 0 - Default, 1 - No, 2 - Yes. Default is 0
# Number: 0, 1, 2
# Mandatory
P2338 = 0

# Use P-Preferred-Identity Header
# 0 - Default, 1 - No, 2 - Yes. Default is 0
# Number: 0, 1, 2
# Mandatory
P2339 = 0

#-----------------------------------------
# Account 1/SIP Settings/Advanced Features
#-----------------------------------------
# Broadsoft Call Center. 0 - No, 1 - Yes. Default is 0
# Number: 0, 1
# Mandatory
P2341 = 0

# Hoteling Event. 0 - No, 1 - Yes. Default is 0
# Number: 0, 1
# Mandatory
P2342 = 0

# Call Center Status. 0 - No, 1 - Yes. Default is 0
# Number: 0, 1
# Mandatory
P2343 = 0

# PUBLISH to Call Center. 0 - No, 1 - Yes. Default is 0
# Number: 0, 1
# Mandatory
P2340 = 0

# Feature Key Synchronization. 0 - Disabled, 1 - Enabled. Default is 0
# Number: 0, 1
# Mandatory
P2325 = 0

# Line-Seize Timeout (in seconds). Default is 15
# Number: 15 - 60
# Mandatory
P2313 = 15

# Eventlist BLF URI
# String
P134 =

# Conference URI
# String
P2318 =

# Music On Hold URI
# String
P2350 =

# BLF Call-pickup Prefix. Default is **
# String
# Mandatory
P1347 = **

# PUBLISH for Presence. 0 - No, 1 - Yes. Default is 0
# Number: 0, 1
# Mandatory
P188 = 0

# Special Feature. 100 - Standard, 101 - Nortel MCS, 102- Broadsoft, 108 - CBCOM, 109 - RNK, 110 - Sylantro, 117 - Huawei IMS
# Default is 100
# Number: 100, 101, 102, 108, 109, 110, 117
# Mandatory
P198 = 100

#-----------------------------------------
# Account 1/SIP Settings/Session Timer
#-----------------------------------------
# Session Expiration (in seconds). Default is 180
# Number: 90 - 64800
# Mandatory
P260 = 180

# Minimum SE (in seconds). Default is 90. This value must be lower than or equal to P260
# Number: 90 - 64800
# Mandatory
P261 = 90

# Caller Request Timer (Request for timer when calling). 0 - No, 1 - Yes. Default is 0
# Number: 0, 1
# Mandatory
P262 = 0

# Callee Request Timer (Request for timer when called. i.e. if remote party supports timer but did not request for one)
# 0 - No, 1 - Yes. Default is 0
# Number: 0, 1
# Mandatory
P263 = 0

# Force Timer (Still use timer when remote party does not support timer). 0 - No, 1 - Yes. Default is 0
# Number: 0, 1
# Mandatory
P264 = 0

# UAC Specify Refresher. 0 - omit, 1 - UAC, 2 - UAS. Default is 0
# Number: 0, 1, 2
# Mandatory
P266 = 0

# UAS Specify Refresher. 1 - UAC, 2 - UAS. Default is 1
# Number: 1, 2
# Mandatory
P267 = 1

# Force INVITE (Always refresh with INVITE instead of UPDATE even when remote party supports UPDATE).
# 0 - No, 1 - Yes. Default is 0
# Number: 0, 1
# Mandatory
P265 = 0

#-----------------------------------------
# Account 1/SIP Settings/Security Settings
#-----------------------------------------
# Check Domain Certificates. When set to Yes/Enabled, domain certificate will be checked as defined in RFC5922
# 0 - No, 1 - Yes. Default is 0
# Number: 0, 1
# Mandatory
P2311 = 0

# Validate Incoming Messages. 0 - No, 1 - Yes. Default is 0
# Number: 0, 1
# Mandatory
P2306 = 0

# Check SIP User ID for incoming INVITE. 0 - No, 1 - Yes. Default is 0
# Number: 0, 1
# Mandatory
P258 = 0

# Accept Incoming SIP from Proxy Only. 0 - No, 1 - Yes. Default is 0
# Number: 0, 1
# Mandatory
P2347 = 0

# Authenticate Incoming INVITE. 0 - No, 1 - Yes. Default is 0
# Number: 0, 1
# Mandatory
P2346 = 0

#-----------------------------------------
# Account 1/Audio Settings
#-----------------------------------------
# Send DTMF: In-audio. 0 - No, 1 - Yes. Default is 0
# Number: 0, 1
# Mandatory
P2301 = 1

# Send DTMF: Via RTP (RFC2833). 0 - No, 1 - Yes. Default is 1
# Number: 0, 1
# Mandatory
P2302 = 0

# Send DTMF: Via SIP INFO. 0 - No, 1 - Yes. Default is 0
# Number: 0, 1
# Mandatory
P2303 = 0

# DTMF Payload Type. Default is 101
# Number: 96 - 127
# Mandatory
P79 = 101

# Preferred Vocoder
# 0 - PCMU, 2 - G.726-32, 4 - G.723.1, 8 - PCMA, 9 - G.722, 18 - G.729A/B, 98 - iLBC
# choice 1. Default is 0
# Number: 0, 2, 4, 8, 9, 18, 98
# Mandatory
P57 = 0

# choice 2. Default is 8
# Number: 0, 2, 4, 8, 9, 18, 98
# Mandatory
P58 = 8

# choice 3. Default is 4
# Number: 0, 2, 4, 8, 9, 18, 98
# Mandatory
P59 = 4

# choice 4. Default is 18
# Number: 0, 2, 4, 8, 9, 18, 98
# Mandatory
P60 = 18

# choice 5. Default is 9
# Number: 0, 2, 4, 8, 9, 18, 98
# Mandatory
P61 = 9

# choice 6. Default is 98
# Number: 0, 2, 4, 8, 9, 18, 98
# Mandatory
P62 = 98

# choice 7. Default is 2
# Number: 0, 2, 4, 8, 9, 18, 98
# Mandatory
P46 = 2

# Use First Matching Vocoder in 200OK SDP. 0 - No, 1 - Yes. Default is 0
# Number: 0, 1
# Mandatory
P2348 = 0

# SRTP Mode. 0 - Disabled, 1 - Enabled but not forced, 2 - Enabled and forced, 3 - Optional. Default is 0
# Number: 0, 1, 2, 3
# Mandatory
P183 = 0

# Symmetric RTP. 0 - No, 1 - Yes. Default is 0
# Number: 0, 1
# Mandatory
P291 = 0

# Silence Suppression. 0 - No, 1 - Yes. Default is 0
# Number: 0, 1
# Mandatory
P50 = 0

# Voice Frames per TX (up to 10/20/32/64 frames for G711/G726/G723/other codecs respectively). Default is 2
# Number: 1 - 64
# Mandatory
P37 = 2

# G723 rate. 0 - 6.3kbps encoding rate, 1 - 5.3kbps encoding rate. Default is 1
# Number: 0, 1
# Mandatory
P49 = 1

# G.726-32 Packing Mode. 0 - ITU, 1 - IETF. Default is 0
# Number: 0, 1
# Mandatory
P2323 = 0

# iLBC Frame Size. 0 - 20ms, 1 - 30ms. Default is 1
# Number: 0, 1
# Mandatory
P97 = 1

# iLBC payload type. Default is 97
# Number: 96 - 127
# Mandatory
P96 = 97

# Jitter Buffer Type. 0 - Fixed, 1 - Adaptive. Default is 1
# Number: 0, 1
# Mandatory
P133 = 1

# Jitter Buffer Length. 0 - 100ms, 1 - 200ms, 2 - 300ms, 3 - 400ms, 4 - 500ms, 5 - 600ms, 6 - 700ms, 7 - 800ms
# Default is 2
# Number: 0, 1, 2, 3, 4, 5, 6, 7
# Mandatory
P132 = 2

#-----------------------------------------
# Account 1/Call Settings
#-----------------------------------------
# Early Dial (use "Yes" only if proxy supports 484 response). 0 - No, 1 - Yes. Default is 0
# Number: 0, 1
# Mandatory
P29 = 0

# Dial Plan Prefix
# String 
P66 =

# Dial Plan. Default is { x+ | *x+ | *xx*x+ }
# String
# Mandatory
P290 = { x+ | *x+ | *xx*x+ }

# Delayed Call Forward Wait Time (in seconds). Default is 20
# Number: 1 - 120
# Mandatory
P139 = 20

# Включить дополнительные функции (Enable Call Features).  0 - No, 1 - Yes. Default is 1
# Number: 0, 1
# Mandatory
P191 = 0

# Call Log. 0 - Log All, 1 - Log Incoming/Outgoing only (Missed calls NOT recorded), 2 - Disable Call Log. Default is 0
# Number: 0, 1, 2
# Mandatory
P182 = 0

# Мелодия звонка по умолчанию (Account Ring Tone). 0 - system ring tone, 1 - custom ring tone 1, 2 - custom ring tone 2, 3 - custom ring tone 3. Default is 0
# Number: 0, 1, 2, 3
# Mandatory
# P104 = 0

# Matching Incoming Caller ID. Matching Rule 1
# String
P1488 = 

# Matching Rule 1 Distinctive Ringtone
# 0 - system ring tone, 1 - custom ring tone 1, 2 - custom ring tone 2, 3 - custom ring tone 3. Default is 0.
# Number: 0, 1, 2, 3
# Mandatory
P1489 = 0

# Matching Incoming Caller ID. Matching Rule 2
# String
P1490 = 

# Matching Rule 2 Distinctive Ringtone
# 0 - system ring tone, 1 - custom ring tone 1, 2 - custom ring tone 2, 3 - custom ring tone 3. Default is 0
# Number: 0, 1, 2, 3
# Mandatory
P1491 = 0

# Matching Incoming Caller ID. Matching Rule 3
# String
P1492 =

# Matching Rule 3 Distinctive Ringtone
# 0 - system ring tone, 1 - custom ring tone 1, 2 - custom ring tone 2, 3 - custom ring tone 3. Default is 0
# Number: 0, 1, 2, 3
# Mandatory
P1493 = 0

# Ring Timeout (in seconds). Default is 60
# Number: 30 - 3600
# Mandatory
P1328 = 60

# Send Anonymous (caller ID will be blocked if set to Yes). 0 - No, 1 - Yes. Default is 0
# Number: 0, 1
# Mandatory
P65 = 0

# Anonymous Call Rejection. 0 - No, 1 - Yes. Default is 0
# Number: 0, 1
# Mandatory
P129 = 0

# Auto Answer. 0 - No, 1 - Yes. Default is 0
# Number: 0, 1
# Mandatory
P90 = 0

# Allow Auto Answer by Call-Info. 0 - No, 1 - Yes. Default is 0
# Number: 0, 1
# Mandatory
P298 = 0

# Refer-To Use Target Contact. 0 - No, 1 - Yes. Default is 0
# Number: 0, 1
# Mandatory
P135 = 0

# Transfer on conference Hang-Up. 0 - No, 1 - Yes. Default is 0
# Number: 0, 1
# Mandatory
P2304 = 0

# No Key Entry Timeout (in seconds). Default is 4
# Number: 1 - 15
# Mandatory
P85 = 4

# Use # as Dial Key. 0 - No, 1 - Yes. Default is 1
# Number: 0, 1
# Mandatory
P72 = 1

# DND Call Feature ON
# String
P2344 =

# DND Call Feature OFF
# String
P2345 =


####################################################################
# Account 2
####################################################################

#--------------------------------------
# Account 2/Network Settings
#--------------------------------------
# DNS Mode. 0 - A Record, 1 - SRV, 2 - NAPTR/SRV, 3 - Use Configured IP. Default is 0
# Number: 0, 1, 2, 3
# Mandatory
P408 = 0

# Primary IP. Maximum 15 characters
# String
P2408 = 

# Backup IP 1
# String
P2409 = 

# Backup IP 2
# String
P2410 =

# NAT Traversal. 0 - No, 1 - STUN, 2 - keep alive, 3 - UPnP, 4 - Auto, 5 - VPN. Default is 0
# Number: 0, 1, 2, 3, 4, 5
# Mandatory
P414 = 0

# Proxy-Require (A SIP extension to enable firewall penetration). Max length is 64 characters
# String
P418 =

#-----------------------------------------
# Account 2/SIP Settings/Basic Settings
#-----------------------------------------
# TEL URI. 0 - Disabled, 1 - User=Phone, 2 - Enabled. Default is 0
# Number: 0, 1, 2
# Mandatory
P409 = 0

# SIP Registration. 0 - No, 1 - Yes. Default is 1
# Number: 0, 1
# Mandatory
P410 = 1

# Unregister On Reboot. 0 - No, 1 - Yes. Default is 0
# Number: 0, 1
# Mandatory
P411 = 0

# Register Expiration (in minutes). Default is 60. Max is 45 days
# Number: 1 - 64800
# Mandatory
P412 = 60

# Reregister before Expiration (in seconds). Default is 0
# Number: 0 - 64800
# Mandatory
P2430 = 0

# Local SIP port. Default is 5062
# Number
# Mandatory
P413 = 5062

# SIP Registration Failure Retry Wait Time (in seconds). Default is 20
# Number: 1 - 3600
# Mandatory
P471 = 20

# SIP T1 Timeout. RFC 3261 T1 value (RTT estimate)
# 50 - 0.5 sec, 100 - 1 sec, 200 - 2 sec. Default is 100
# Number: 50, 100, 200
# Mandatory
P440 = 50

# SIP T2 Interval. RFC 3261 T2 value. The maximum retransmit interval for non-INVITE requests and INVITE responses
# 200 - 2 sec, 400 - 4 sec, 800 - 8 sec. Default is 400
# Number: 200, 400, 800
# Mandatory
P441 = 400

# SIP Transport. 0 - UDP, 1 - TCP, 2 - TCP/TLS. Default is 0
# Number: 0, 1, 2
# Mandatory
P448 = 0

# SIP URI Scheme when using TLS. 0 - sip, 1 - sips. Default is 1
# Number: 0, 1
# Mandatory
P2429 = 1

# Use Actual Ephemeral Port in Contact with TCP/TLS. 0 - No, 1- Yes. Default is 0
# Number: 0, 1
# Mandatory
P2431 = 0

# Remove OBP from Route. 0 - No, 1 - Yes. Default is 0
# Number: 0, 1
# Mandatory
P2405 = 0

# Support SIP Instace ID. 0 - No, 1 - Yes. Default is 1
# Number: 0, 1
# Mandatory
P489 = 1

# SUBSCRIBE for MWI (Whether or not send SUBSCRIBE for Message Waiting Indication). 0 - No, 1 - Yes. Default is 0
# Number: 0, 1
# Mandatory
P415 = 0

# SUBSCRIBE for Registration. 0 - No, 1 - Yes. Default is 0
# Number: 0, 1
# Mandatory
P2419 = 0

# Enable 100rel. 0 - No, 1 - Yes. Default is 0
# Number: 0, 1
# Mandatory
P435 = 0

# Caller ID Display. 0 - Auto, 1 - Disabled, 2 - From Header. Default is 0
# Number: 0, 1, 2
# Mandatory
P2424 = 0

# Use Privacy Header
# 0 - Default, 1 - No, 2 - Yes. Default is 0
# Number: 0, 1, 2
# Mandatory
P2438 = 0

# Use P-Preferred-Identity Header. 0 - Default, 1 - No, 2 - Yes. Default is 0
# Number: 0, 1, 2
# Mandatory
P2439 = 0

#-----------------------------------------
# Account 2/SIP Settings/Advanced Features
#-----------------------------------------
# Broadsoft Call Center. 0 - No, 1 - Yes. Default is 0
# Number: 0, 1
# Mandatory
P2441 = 0

# Hoteling Event. 0 - No, 1 - Yes. Default is 0
# Number: 0, 1
# Mandatory
P2442 = 0

# Call Center Status. 0 - No, 1 - Yes. Default is 0
# Number: 0, 1
# Mandatory
P2443 = 0

# PUBLISH to Call Center. 0 - No, 1 - Yes. Default is 0
# Number: 0, 1
# Mandatory
P2440 = 0

# Feature Key Synchronization. 0 - Disabled, 1 - Enabled. Default is 0.
# Number: 0, 1
# Mandatory
P2425 = 0

# Line-Seize Timeout (in seconds). Default is 15
# Number: 15 - 60
# Mandatory
P2413 = 15

# Eventlist BLF URI
# String
P444 = 

# Conference URI
# String
P2418 =

# Music On Hold URI
# String
P2450 =

# BLF Call-pickup Prefix. Default is **
# String
# Mandatory
P481 = **

# PUBLISH for Presence. 0 - No, 1 - Yes. Default is 0
# Number: 0, 1
# Mandatory
P488 = 0

# Special Feature. 100 - Standard, 101 - Nortel MCS, 102- Broadsoft, 108 - CBCOM, 109 - RNK, 110 - Sylantro, 117 - Huawei IMS
# Number: 100, 101, 102, 108, 109, 110, 117. Default is 100
# Mandatory
P424 = 100

#-----------------------------------------
# Account 2/SIP Settings/Session Timer
#-----------------------------------------
# Session Expiration (in seconds). Default is 180
# Number: 90 - 64800
# Mandatory
P434 = 180

# Minimum SE (in seconds). Default is 90. This value must be lower than or equal to P434
# Number: 90 - 64800
# Mandatory
P427 = 90

# Caller Request Timer (Request for timer when calling). 0 - No, 1 - Yes
# Number: 0, 1
# Mandatory
P428 = 0

# Callee Request Timer (Request for timer when called. i.e. if remote party supports timer but did not request for one)
# 0 - No, 1 - Yes. Default is 0
# Number: 0, 1
# Mandatory 
P429 = 0

# Force Timer (Still use timer when remote party does not support timer). 0 - No, 1 - Yes. Default is 0
# Number: 0, 1
# Mandatory
P430 = 0	

# UAC Specify Refresher. 0 - omit, 1 - UAC, 2 - UAS. Default is 0
# Number: 0, 1, 2
# Mandatory
P432 = 0

# UAS Specify Refresher. 1 - UAC, 2 - UAS. Default is 1
# Number: 1, 2
# Mandatory
P433 = 1

# Force INVITE (Always refresh with INVITE instead of UPDATE even when remote party supports UPDATE)
# 0 - No, 1 - Yes. Default is 0
# Number: 0, 1
# Mandatory
P431 = 0

#-----------------------------------------
# Account 2/SIP Settings/Security Settings
#-----------------------------------------
# Check Domain Certificates. 0 - No, 1 - Yes. When set to Yes/Enabled, the domain certificate will be checked as defined in RFC5922
# 0 - No, 1 - Yes. Default is 0
# Number: 0, 1
# Mandatory
P2411 = 0

# Validate Incoming Messages. 0 - No, 1 - Yes. Default is 0
# Number: 0, 1
# Mandatory
P2406 = 0

# Check SIP User ID for incoming INVITE. 0 - No, 1 - Yes. Default is 0
# Number: 0, 1
# Mandatory
P449 = 0

# Accept Incoming SIP from Proxy Only. 0 - No, 1 - Yes. Default is 0
# Number: 0, 1
# Mandatory
P2447 = 0

# Authenticate Incoming INVITE. 0 - No, 1 - Yes. Default is 0
# Number: 0, 1
# Mandatory
P2446 = 0

#-----------------------------------------
# Account 2/Audio Settings
#-----------------------------------------
# Send DTMF: In-audio. 0 - No, 1 - Yes. Default is 0
# Number: 0, 1
# Mandatory
P2401 = 0

# Send DTMF: Via RTP (RFC2833). 0 - No, 1 - Yes. Default is 1
# Number: 0, 1
# Mandatory
P2402 = 1

# Send DTMF: Via SIP INFO. 0 - No, 1 - Yes. Default is 0
# Number: 0, 1
# Mandatory
P2403 = 0

# DTMF Payload Type. Default is 101
# Number: 96 - 127
# Mandatory
P496 = 101

# Preferred Vocoder
# 0 - PCMU, 2 - G.726-32, 4 - G.723.1, 8 - PCMA, 9 - G.722, 18 - G.729A/B, 98 - iLBC
# choice 1. Default is 0
# Number: 0, 2, 4, 8, 9, 18, 98
# Mandatory
P451 = 0

# choice 2. Default is 8
# Number: 0, 2, 4, 8, 9, 18, 98
# Mandatory
P452 = 8

# choice 3. Default is 4
# Number: 0, 2, 4, 8, 9, 18, 98
# Mandatory
P453 = 4

# choice 4. Default is 18
# Number: 0, 2, 4, 8, 9, 18, 98
# Mandatory
P454 = 18

# choice 5. Default is 9
# Number: 0, 2, 4, 8, 9, 18, 98
# Mandatory
P455 = 9

# choice 6. Default is 98
# Number: 0, 2, 4, 8, 9, 18, 98
# Mandatory
P456 = 98

# choice 7. Default is 2
# Number: 0, 2, 4, 8, 9, 18, 98
# Mandatory
P457 = 2

# Use First Matching Vocoder in 200OK SDP. 0 - No, 1 - Yes. Default is 0
# Number: 0, 1
# Mandatory
P2448 = 0

# SRTP Mode
# 0 - Disabled, 1 - Enabled but not forced, 2 - Enabled and forced, 3 - Optional. Default is 0
# Number: 0, 1, 2, 3
# Mandatory
P443 = 0

# Symmetric RTP. 0 - No, 1 - Yes. Default is 0
# Number: 0, 1
# Mandatory
P460 = 0

# Silence Suppression 0 - No, 1 - Yes. Default is 0
# Number: 0, 1
# Mandatory
P485 = 0

# Voice Frames per TX (up to 10/20/32/64 frames for G711/G726/G723/other codecs respectively). Default is 2
# Number: 1 - 64
# Mandatory
P486 = 2

# G723 rate. 0 - 6.3kbps encoding rate, 1 - 5.3kbps encoding rate. Default is 1
# Number: 0, 1
# Mandatory
P493 = 1

# G.726-32 Packing Mode. 0 - ITU, 1 - IETF. default is 0
# Number: 0, 1
# Mandatory
P2423 = 0

# iLBC Frame Size. 0 - 20ms, 1 - 30ms. Default is 1
# Number: 0, 1
# Mandatory
P495 = 1

# iLBC payload type. Default is 97.
# Number: 96 - 127
# Mandatory
P494 = 97

# Jitter Buffer Type. 0 - Fixed, 1 - Adaptive. Default is 1
# Number: 0, 1
# Mandatory
P498 = 1

# Jitter Buffer Length. 
# 0 - 100ms, 1 - 200ms, 2 - 300ms, 3 - 400ms, 4 - 500ms, 5 - 600ms, 6 - 700ms, 7 - 800ms. Default is 2
# Number: 0, 1, 2, 3, 4, 5, 6, 7
# Mandatory
P497 = 2

#-----------------------------------------
# Account 2/Call Settings
#-----------------------------------------
# Early Dial (use "Yes" only if proxy supports 484 response). 0 - No, 1 - Yes. Default is 0
# Number: 0, 1
# Mandatory
P422 = 0

# Dial Plan Prefix
# String
P419 = 

# Dial Plan. Default is { x+ | *x+ | *xx*x+ }
# String
# Mandatory
P459= { x+ | *x+ | *xx*x+ }

# Delayed Call Forward Wait Time (in seconds). Default 20
# Number: 1 - 120
# Mandatory
P470 = 20

# Включить дополнительные функции (Enable Call Features). 0 - No, 1 - Yes. Default is 1
# Number: 0, 1
# Mandatory
P420 = 0

# Call Log. 0 - Log All, 1 - Log Incoming/Outgoing only (Missed calls NOT recorded), 2 - Disable Call Log. Default is 0
# Number: 0, 1, 2
# Mandatory
P442 = 0

# Мелодия звонка по умолчанию (Account Ring Tone). 0 - system ring tone, 1 - custom ring tone 1, 2 - custom ring tone 2, 3 - custom ring tone 3. Default is 0
# Number: 0, 1, 2, 3
# Mandatory 
# P423 = 0

# Matching Incoming Caller ID. Matching Rule 1
# String
P1494 = 

# Matching Rule 1 Distinctive Ringtone
# 0 - system ring tone, 1 - custom ring tone 1, 2 - custom ring tone 2, 3 - custom ring tone 3. Default is 0
# Number: 0, 1, 2, 3
# Mandatory
P1495 = 0

# Matching Incoming Caller ID. Matching Rule 2.
# String
P1496 = 

# Matching Rule 2 Distinctive Ringtone.
# 0 - system ring tone, 1 - custom ring tone 1, 2 - custom ring tone 2, 3 - custom ring tone 3. Default is 0
# Number: 0, 1, 2, 3
# Mandatory
P1497 = 0

# Matching Incoming Caller ID. Matching Rule 3.
# String
P1498 =

# Matching Rule 3 Distinctive Ringtone.
# 0 - system ring tone, 1 - custom ring tone 1, 2 - custom ring tone 2, 3 - custom ring tone 3. Default is 0
# Number: 0, 1, 2, 3
# Mandatory
P1499 = 0

# Ring Timeout (in seconds) Default is 60
# Number: 30 - 3600
# Mandatory
P476 = 60

# Send Anonymous (caller ID will be blocked if set to Yes). 0 - No, 1 - Yes. Default is 0
# Number: 0, 1
# Mandatory
P421 = 0

# Anonymous Call Rejection. 0 - No, 1 - Yes. Default is 0
# Number: 0, 1
# Mandatory
P446 = 0

# Auto Answer. 0 - No, 1 - Yes. Default is 0
# Number: 0, 1
# Mandatory
P425 = 0

# Allow Auto Answer by Call-Info. 0 - No, 1 - Yes. Default is 0
# Number: 0, 1
# Mandatory
P438 = 0

# Refer-To Use Target Contact. 0 - No, 1 - Yes. Default is 0
# Number: 0, 1
# Mandatory
P469 = 0

# Transfer on conference Hang-Up. 0 - No, 1 - Yes. Default is 0
# Number: 0, 1
# Mandatory
P2404 = 0

# No Key Entry Timeout. Default is 4
# Number: 1 - 15
# Mandatory
P491 = 4

# Use # as Dial Key. 0 - No, 1 - Yes. Default is 1
# Number: 0, 1
# Mandatory
P492 = 1

# DND Call Feature ON
# String
P2444 =

# DND Call Feature OFF
# String
P2445 =


##############################################################################
## Network/Basic Settings                                                   ##
##############################################################################

# Internet Protocol. 0 - Prefer IPv4, 1 - Prefer IPv6. Default is 0
# Number: 0, 1
# Mandatory
P1415 = 0

# IP Address Mode. 0 - DHCP, 1 - Static IP, 2 - PPPoE. Default is 0
# Number: 0, 1, 2
# Mandatory
# P8 = 0

#--------------------------------------
# DHCP
#--------------------------------------
# Host name, DHCP option 12. Max length allowed is 64 characters
# String
P146 =

# Vendor Class ID, DHCP option 60. Max length allowed is 64 characters
# Default value for GXP1400 - Grandstream GXP1400
# Default value for GXP1405 - Grandstream GXP1405
# String
# P148 =  Grandstream GXP

#--------------------------------------
# PPPoE
#--------------------------------------
# PPPoE Account ID
# String
P82 =

# PPPoE Password
# String
# Cannot contain ` or "
P83 =

# PPPoE Service Name
# String 
P269 =

#--------------------------------------
# Statically Configured
#--------------------------------------
# IP Address. Ignore if DHCP or PPPoE is used
# Number: 0 - 255
P9 = 192

# Number: 0 - 255
P10 = 168

# Number: 0 - 255
P11 = 0

# Number: 0 - 255
P12 = 160

# Subnet mask. Ignore if DHCP or PPPoE is used
# Number: 0 - 255
P13 = 255

# Number: 0 - 255
P14 = 255

# Number: 0 - 255
P15 = 0

# Number: 0 - 255
P16 = 0

# Gateway. Ignore if DHCP or PPPoE is used
# Number: 0 - 255
P17 = 0

# Number: 0 - 255
P18 = 0

# Number: 0 - 255
P19 = 0

# Number: 0 - 255
P20 = 0

# DNS 1 Server. Ignore if DHCP or PPPoE is used
# Number: 0 - 255
P21 = 0

# Number: 0 - 255
P22 = 0

# Number: 0 - 255
P23 = 0

# Number: 0 - 255
P24 = 0

# DNS 2 Server. Ignore if DHCP or PPPoE is used
# Number: 0 - 255
P25 = 0

# Number: 0 - 255
P26 = 0

# Number: 0 - 255
P27 = 0

# Number: 0 - 255
P28 = 0

# Preferred DNS server.  (if specified).
# Number: 0 - 255
P92 = 0

# Number: 0 - 255
P93 = 0

# Number: 0 - 255
P94 = 0

# Number: 0 - 255
P95 = 0

# IPv6 Address type. 0 - Auto Configured, 1 - Statically Configured. Default is 0.
# Number: 0, 1
# Mandatory
P1419 = 0

# DNS Server 1 for IPv6 Address
# String: a-z, A-Z, 0-9, ".", ":", "[", "]"
P1424 =

# DNS Server 2 for IPv6 Address
# String: a-z, A-Z, 0-9, ".", ":", "[", "]"
P1425 =

# Preferred DNS Server for IPv6 Address
# String: a-z, A-Z, 0-9, ".", ":", "[", "]"
P1423 =

# IPv6 Address type: Statically configured. 0 - Full Static, 1 - Prefix Static
# Number: 0, 1
# P1426 =

# Full Static: Static IPv6 Address
# P1420 =

# Full Static: IPv6 Prefix Length
# P1421 =

# Prefix Static: IPv6 Prefix (64bits)
# P1422 =

##############################################################################
## Network/Advanced Settings
##############################################################################

# 802.1X Mode. 0 - disable, 1 - EAP-MD5. Default is 0
# Number: 0, 1
# Mandatory
P7901 = 0

# 802.1X Identity. Max length allowed is 64 characters
# String
P7902 = 

# MD5 Password. Max length allowed is 64 characters
# String
P7903 =

# HTTP Proxy
# String
P1552 =

# HTTPS Proxy
# String
P1553 =

# Layer 3 QoS (IP Diff-Serv or Precedence value for RTP). Default is 12
# Number: 0 - 63
# Mandatory
P38 = 12

# Layer 2 QoS. 802.1Q/VLAN Tag (VLAN classification for RTP). Default is 0
# Number: 0 - 4094
# Mandatory
P51 = 0

# Layer 2 QoS. 802.1p priority value (0 - 7). Default is 0
# Number: 0 - 7
# Mandatory
P87 = 0

# PC Port Mode. 0 - Enable, 1 - Disabled, 2 - Mirrored. Default is 0
# Number: 0, 1, 2
# Mandatory
P1348 = 0

# Enable LLDP.  0 - Disabled, 1 - Enabled. Default is 1
# Number: 0, 1
# Mandatory
P1684 = 1

##############################################################################
##  Maintenance/Upgrade and Provisioning
##############################################################################

# Firmware Upgrade and Provisioning
# 0 - Always Check For New Firmware
# 1 - Check New Firmware only when F/W pre/suffix changes
# 2 - Always Skip the Firmware Check
# Number: 0, 1, 2
# Mandatory
P238 = 0

# XML Config File Password
# String
P1359 =

# HTTP/HTTPS User Name
# String
P1360 =

# HTTP/HTTPS Password
# String
P1361 =

# Firmware Upgrade Via. 0 - TFTP Upgrade,  1 - HTTP Upgrade, 2 - HTTPS Upgrade. Default is 1
# Number: 0, 1, 2
# Mandatory
P212 = 1

# Firmware Server Path
# String
P192 = pbx/provisioning

# Config Server Path
# String
P237 = pbx/provisioning

# Firmware File Prefix
# String
P232 =

# Firmware File Postfix
# String
P233 =

# Config File Prefix
# String
P234 =

# Config File Postfix
# String
P235 =

# Allow DHCP Option 43 and Option 66 to override server. 0 - No, 1 - Yes. Default is 1
# When set to Yes(1), it will override the configured provision path and method
# Number: 0, 1
# Mandatory
P145 = 1

# Allow DHCP Option 120 to Override SIP Server
# 0 - No, 1 - Yes. Default is 0
# Number: 0, 1
# Mandatory
P1411 = 0

# Automatic Upgrade. 0 - No, 1 - Yes. Default is No
# Number: 0, 1
# Mandatory
P194 = 0

# Check for new firmware every () minutes. Default is 7 days.
# Number: 60-86400
# Mandatory
P193 = 10080

# Hour of the Day (0-23). Default is 1
# Number: 0 - 23
P285 = 1

# Day of the Week (0-6). Default is 1
# Number: 0-6
P286 = 1

# Authenticate Conf File. 0 - No, 1 - Yes. Default is No
# Number: 0, 1
# Mandatory
P240 = 0

##############################################################################
##  Maintenance/Syslog
##############################################################################

# Syslog Server (name of the server, max length is 64 characters)
# String
P207 = 

# Syslog Level. 0 - NONE, 1 - DEBUG, 2 - INFO, 3 - WARNING, 4 - ERROR. Default is 0
# Number: 0, 1 , 2, 3, 4
# Mandatory
P208 = 0

# Send SIP Log. 0 - Do not send SIP log in Syslog, 1 - Send SIP log in Syslog if configured and set to DEBUG level. Default is 0
# Number: 0, 1
# Mandatory
P1387 = 0

# Auto recover from abnormal. 0 - No, 1 - Yes. Default is 1
# Number: 0, 1
# Mandatory
P1438 = 1

##############################################################################
##  Maintenance/Language
##############################################################################

# Display Language. Default is auto
# ar - Arabic, cz - Czech, de - Deutsh
# en - English, es - Spanish, fr - Francais
# he - Hebrew, hr - Hrvatski, hu - Magyar 
# it - Italiano, ja - japanese, ko - korean
# nl - Dutch, pl - Polski, pt - Portugue
# ru - Russian, sl - Slovenian, tr - Turkish
# zh-tw - traditional chinese, zh - simplified chinese, auto - Automatic
# gxp - Downloaded Language
# String
# Mandatory
P1362 = ru

# Language File postfix (for Downloaded Language)
# String
P399 =

##############################################################################
##  Maintenance/TR-069
##############################################################################

# Enable TR069. 0 - No, 1 - Yes. Default is 0
# Number: 0, 1
# Mandatory
# P1409 = 0

# ACS URL
# String
# P4503 =

# TR-069 Username
# String
P4504 =

# TR-069 Password
# String
P4505 =

# Periodic Inform Enable. 0 - No, 1 - Yes. Default is 0
# Number: 0, 1
# Mandatory
P4506 = 0

# Periodic Inform Interval
# Number
P4507 = 86400

# Connection Request Username	
# String: a-z, A-Z, 0-9
P4511 =

# Connection Request Password	
# String: a-z, A-Z, 0-9
P4512 =

# Connection Request Port
# Number
P4518 = 0

# CPE SSL Certificate
# String: a-z, A-Z, 0-9
P8220 =

# CPE SSL Private Key
# String: a-z, A-Z, 0-9
P8221 =

##############################################################################
##  Maintenance/Security
##############################################################################

# Configuration Via Keypad Menu. 0 - Unrestricted, 1 - Basic settings only, 2 - Constraint mode. Default is 0
# Number: 0, 1, 2
# Mandatory
P1357 = 2

# Включить блокировку клавиатуры клавишей * (Enable STAR key Keypad locking). 0 - No, 1 - Yes. Default is 1
# Number: 0, 1
# Mandatory
P1382 = 1

# SIP TLS Certificate
# String: a-z, A-Z, 0-9
# P280 =

# SIP TLS Private Key
# String: a-z, A-Z, 0-9
# P279 =

# SIP TLS Private Key Password
# String: a-z, A-Z, 0-9
# P281 =

##############################################################################
##  Phonebook/Phonebook Management
##############################################################################

# Enable Phonebook XML Download. # 0 - No, 1 - YES, HTTP, 2 - YES, TFTP, 3 - Yes, HTTPS. Default is 0
# Number: 0, 1, 2, 3
# Mandatory
P330 = 0

# Phonebook XML Server Path
# This is a string of up to 256 characters that should contain a path to the XML file. It MUST be in the host/path format.
# For example: directory.grandstream.com/engineering
# String
P331 =

# Phonebook Download Interval (in minutes)
# Valid value range is 5-720. Default is 0 for disabled
# Number: 0, 5-720; 
P332 = 0

# Remove Manually-edited entries on Download. 0 - No, 1 - Yes. Default is 1
# Number: 0, 1
# Mandatory
P333 = 1

# Phonebook Key Function. 0 - Default, 1 - LDAP Search, 2 - Local Phonebook, 3 - Local Group.
# Number: 0, 1, 2, 3.
# Mandatory
P1526 = 0

##############################################################################
##  Phonebook/LDAP
##############################################################################
# LDAP Directory
# LDAP Server Address, up to 256 characters can be used. It can be IP address or Domain name
# String
P8020 = 

# LDAP Server Port. Default is 389.
# Number: 1 - 65535
P8021 = 389

# Base. The LDAP search base refers to the location in the directory where the search is requested to begin
# Example 1: dc=grandstream,dc=com
# value i 2: ou=Boston, dc=grandstream,dc=com
# String
P8022 =

# User name. The bind "Username" for querying LDAP servers. Some LDAP servers allow anonymous binds in which case the setting can be left blank
# String
P8023 =

# Password. The bind "Password" for querying LDAP servers. And the field can be left blank if the LDAP server allows anonymous binds
# String
P8024 =

# LDAP Number Filter
# LDAP name filter is the filter used for name look ups. Please refer to usermanual for examples
# String
P8025 =

# LDAP Name Filter
# LDAP name filter is the filter used for name look ups. Please refer to usermanual for examples
# String
P8026 =

# LDAP Version. Protocol version for the phone when send the bind requests
# 2 - version 2, 3 - version 3. Default is 3
# Mandatory
P8027 = 3

# LDAP Name Attributes. This setting specifies the "name" attributes of each record which are returned in the LDAP search result
# The setting allows the users to configure multiple space separated name attributes
# String
P8028 =

# LDAP Number Attributes. This setting specifies the “number” attributes of each record which are returned in the LDAP search result
# The setting allows the users to configure multiple space separated number attributes
# String
P8029 =

# LDAP Display Name. The entry information to be shown on phone LCD. Grandstream phones will display up to 3 fields
# String
P8030 =

# Max Hits. The setting specifies the maximum number of results to be returned by the LDAP server
# If the value is set to 0, server will return all search results. Default is 50
# Number: 0 - 32000
# Mandatory
P8031 = 50

# Search Timeout (in seconds). Default is 30
# The setting specifies how long the server should process the request and client waits for server to return
# Number: 0 - 180
# Mandatory
P8032 = 30

# Sort Results. This setting is used for sorting searching result. Default is 0
# Number: 0, 1
# Mandatory
P8033 = 0

# LDAP Lookup
# Incoming calls. 0 - No, 1 - Yes. Default is 0
P8035 = 0

# Outgoing calls. 0 - No, 1 - Yes. Default is 0
P8034 = 0

# Lookup Display Name
# String
P8036 =

##############################################################################
##  Settings/General Settings
##############################################################################
# Local RTP port. Default is 5004
# Number: 1024 - 65535. Must be even number
# Mandatory
P39 = 5004

# Use Random Port. 0 - No, 1 - Yes. Default is 0
# Number: 0, 1
# Mandatory
P78 = 0

# Keep-alive interval (in seconds). Default is 20
# Number: 10 - 160
# Mandatory
P84 = 20

# Use NAT IP. This will enable our SIP client to use this IP in the SIP/SDP message. Example 64.3.153.50
# String: a-z, A-Z, 0-9, ".", ":"
P101 =

# STUN server
# String
P76 =

# Public Mode. 0 - No. 1 - Yes. Default is 0
# Number: 0, 1
# Mandatory
P1345 = 0

##############################################################################
##  Settings/Call Features
##############################################################################
# Off-hook Auto Dial
# String
P71 =

# Off-hook timeout (in seconds). Default is 30
# Number: 10 - 60
# Mandatory
P1485 = 30

# Disable Call Waiting. 0 - No, 1 - Yes. Default is 0
# Number: 0, 1
# Mandatory
P91 = 0

# Disable Call-Waiting Tone. 0 - No, 1 - Yes. Default is 0
# Number: 0, 1
# Mandatory
P186 = 0

# Отключить прямой звонок по IP адресу (Disable Direct IP Call). 0 - No, 1 - Yes. Default is 0
# Number: 0, 1
# Mandatory
P1310 = 1

# Use Quick IP-call mode. 0 - No, 1 - Yes. Default is 0
# Number: 0, 1
# Mandatory
P184 = 0

# Disable Conference. 0 - No, 1 - Yes. Default is 0
# Number: 0, 1
# Mandatory
P1311 = 0

# Disable in-call DTMF display. 0 - No, 1 - Yes. Default is 0
# Number: 0, 1
# Mandatory
P338 = 0

# Enable MPK sending DTMF, 0 - No, 1 - Yes. Default is 0
# Number: 0, 1
# Mandatory
P1339 = 0

# Disable DND Button. 0 - No, 1 - Yes. Default is 0
# Number: 0, 1
# Mandatory
P1340 = 0

# Enable Idle Mute. 0 - No, 1 - Yes. Default is 0
# Number: 0, 1
# Mandatory
P1565 = 0

# Disable Transfer. 0 - No, 1 - Yes. Defauls is 0
# Number: 0, 1
# Mandatory
P1341 = 0

# In-call dial number on pressing transfer key
# String
P1525 =

# Auto-Attended Transfer. 0 - No, 1 -Yes. Default is 0
# Number: 0, 1
# Mandatory
P1376 = 0

# Do not escape '#' as 23% in SIP URL. 0 - No, 1 - Yes. Default is 0
# Number: 0, 1
# Mandatory
P1406 = 0

# Click-To-Dial Feature. 0 - No, 1 - Yes. Default is 0
# Number: 0, 1
# Mandatory
P1561 = 0

# Call History Flash Writing: 0 means this option is disabled
# Write Timeout, 30-3600, in seconds, default is 300
# Number: 30 - 3600
# Mandatory
P1433 = 300

# Max Unsaved Log, 0-500, default is 200
# Number: 0-500
# Mandatory
P1434 = 200

# Blink message LED on ringing. 0 - No, 1 - Yes. Default is 0
P1696 = 0

##############################################################################
##  Settings/Ring Tone
##############################################################################

### Call Progress Tones ###
# Syntax: f1=val,f2=val[,c=on1/off1[-on2/off2[-on3/off3]]]; 
# (Frequencies are in Hz and cadence on and off are in 10ms) 

# System Ring Tone
# String
# Mandatory
P345 = f1=440,f2=480,c=200/400;

# Dial Tone
# String
# Mandatory
P343 = f1=350,f2=440;

# Message Waiting Tone
# String
# Mandatory
P344 = f1=350,f2=440,c=10/10;

# Ring Back Tone
# String
# Mandatory
P346 = f1=440,f2=480,c=200/400;

# Call-Waiting Tone
# String
# Mandatory
P347 = f1=440,f2=440,c=25/525;

# Call-Waiting Tone Gain. 0 - Low, 1 - Medium, 2 - High. Default is 0
# Number: 0, 1, 2
# Mandatory
P1555 = 0

# Busy Tone
# String
# Mandatory
P348 = f1=480,f2=620,c=50/50;

# Reorder Tone
# String
# Mandatory
P349 = f1=480,f2=620,c=25/25;


##############################################################################
##  Settings/Audio Control
##############################################################################
# HEADSET Key Mode. 0 = Default Mode, 1 = Toggle Headset/Speaker. Default is 0
# Number: 0, 1
# Mandatory
P1312 = 0

# Always Ring Speaker. 0 - No, 1 - Yes. Default is 0
# Number: 0, 1
# Mandatory
P1439 = 0

# Headset TX gain(db). 1 - -6, 0 - 0, 2 - +6. Default is 0
# Number: 0, 1, 2
# Mandatory
P1301 = 0

# Headset RX gain(db). 1 - -6, 0 - 0, 2 - +6. Default is 0
# Number: 0, 1, 2
# Mandatory
P1302 = 0

# Handset TX gain(db). 1 - -6, 0 - 0, 2 - +6. Default is 0
# Number: 0, 1, 2
# Mandatory
P1464 = 0


##############################################################################
##  Settings/LCD Display
##############################################################################
# LCD Contrast. Default is 10
# Number: 0 - 20
# Mandatory
P1329 = 10


##############################################################################
##  Settings/Date and Time
##############################################################################
# NTP Server
# String
P30 = pbx

# Allow DHCP Option 42 to override NTP server. 0 - No, 1 - Yes. Default is 1
# When set to Yes(1), it will override the configured NTP server
# Number: 0, 1
# Mandatory
P144 = 1

# Time Zone
# auto - Automatic
# TZA+12 - GMT-12:00 (International Date Line West)
# TZB+11 - GMT-11:00 (Midway Island, Samoa) 
# HAW10 - GMT-10:00 (US Hawaiian Time) 
# AKST9AKDT - GMT-9:00 (US Alaska Time) 
# PST8PDT - GMT-8:00 (US Pacific Time, Los Angeles)
# PST8PDT,M4.1.0,M10.5.0 - GMT-08:00 (Baja California)
# MST7MDT - GMT-07:00 (US Mountain Time, Denver) 
# MST7 - GMT-07:00 (Mountain Time (Arizona, no DST)) 
# MST7MDT,M4.1.0,M10.5.0 - GMT-07:00 (Chihuahua, La Paz, Mazatlan)
# CST6CDT - GMT-06:00 (Central Time) 
# CST+6 - GMT-06:00 (Central America) 
# CST6CDT,M4.1.0,M10.5.0 - GMT-06:00 (Guadalajara, Mexico City, Monterrey)
# EST5EDT - GMT-05:00 (Eastern Time)
# EST5 - GMT-05:00 (Eastern Time without daylight saving) 
# TZf+4:30 - GMT-04:30 (Caracas) 
# AST4ADT - GMT-04:00 (Atlantic Time) 
# AST4ADT,M4.1.0/00:01:00,M10.5.0/00:01:00 - GMT-04:00 (Atlantic Time (New Brunswick)) 
# NST+3:30NDT+2:30,M4.1.0/00:01:00,M10.5.0/00:01:00 - GMT-03:30 (Newfoundland Time) 
# TZK+3 - GMT-03:00 (Greenland) 
# BRST+3BRDT+2,M10.3.0,M2.3.0 - GMT-03:00 (Brazil, Sao Paulo) 
# UTC+3 - GMT-02:00 (Argentina) 
# TZL+2 - GMT-02:00 (Mid-Atlantic) 
# TZM+1 - GMT-01:00 (Azores, Cape Verdi Is.) 
# TZN+0 - GMT (Edinburgh, Casablanca, Monrovia) 
# GMT+0BST-1,M3.5.0/01:00:00,M10.5.0/02:00:00 - GMT (London, Great Britain) 
# WET-0WEST-1,M3.5.0/01:00:00,M10.5.0/02:00:00 - GMT (Lisbon, Portugal) 
# GMT+0IST-1,M3.5.0/01:00:00,M10.5.0/02:00:00 - GMT (Dublin, Ireland) 
# CET-1CEST-2,M3.5.0/02:00:00,M10.5.0/03:00:00 - GMT+01:00 (Paris, Vienna, Warsaw, Roma, Madrid, Prague, Berlin, Budapest, Amsterdam, Belgium)  
# TZP-2 - GMT+02:00 (Israel, Cairo, Athens, Istanbul, Buchrest) 
# EET-2EEST-3,M3.5.0/03:00:00,M10.5.0/04:00:00 - GMT+02:00 (Helsinki, Athens, Tallinn) 
# EET-2EEST,M3.5.0/3,M10.5.0/4 - GMT+02:00 (Kyiv, Ukraine) 
# TZQ-3 - GMT+03:00 (Kuwait, Baghdad, Tehran, Nairobi) 
# MSK-3MSD,M3.5.0/2,M10.5.0/3 - GMT+03:00 (Moscow, Russia) 
# MST-3MDT,M3.5.0/2,M10.5.0/3 - GMT+03:00 (St.Petersburg, Russia) 
# TZR-4 - GMT+04:00 (Abu Dhabi, Baku) 
# TZS-5 - GMT+05:00 (Islamabad, Ekaterinburg, Karachi, Tashkent) 
# TZT-5:30 - GMT+05:30 (Chennai, New Delhi, Mumbai) 
# TZU-5:45 - GMT+05:45 (Kathmandu) 
# TZV-6 - GMT+06:00 (Almaty, Astana, Dhaka, Novosibirsk) 
# TZW-6:30 - GMT+06:30 (Rangoon) 
# TZX-7 - GMT+07:00 (Bankok, Hanoi, Krasnoyarsk) 
# WIB-7 - GMT+07:00 (Jakarta) 
# TZY-8 - GMT+08:00 (Beijing, Taipei, Kuala Lumpur, Irkutsk) 
# SGT-8 - GMT+08:00 (Singapore) 
# ULAT-8 - GMT+08:00 (Ulaanbaatar, Mongolia) 
# WST-8 - GMT+08:00 (Perth) 
# TZZ-9 - GMT+09:00 (Japan, Korea, Yakutsk) 
# CST-9:30CDT-10:30,M10.5.0/02:00:00,M3.5.0/03:00:00 - GMT+09:30 (Adelaide) 
# CST-9:30 - GMT+09:30 (Darwin) 
# TZb-10 - GMT+10:00 (Guam) 
# EST-10EDT-11,M10.1.0/02:00:00,M3.5.0/03:00:00 - GMT+10:00 (Hobart) 
# EST-10EDT-11,M10.5.0/02:00:00,M3.5.0/03:00:00 - GMT+10:00 (Sydney, Melbourne, Canberra) 
# EST-10 - GMT+10:00 (Brisbane) 
# TZc-11 - GMT+11:00 (Magadan, Solomon Is., New Caledonia) 
# NZST-12NZDT-13,M10.1.0/02:00:00,M3.3.0/03:00:00 - GMT+12:00 (Auckland, Wellington) 
# TZd-12 - GMT+12:00 (Fiji) 
# TZe-13 - GMT+13:00 (Nuku'alofa) 
# customize - Self-Defined Time Zone
# String
# Mandatory
P64 = auto

# Allow DHCP Option 2 to override Time Zone setting. 0 - No, 1 - Yes. Default is 1
# When set to Yes(1), it will override the configured Time Zone setting if available 
# Number: 0, 1
# Mandatory
P143 = 1

# Self Defined Time zone. Max length allowed is 64 characters
# String
# Mandatory
P246 = MTZ+6MDT+5,M4.1.0,M11.1.0

# Date Display Format
# 0: yyyy-mm-dd      eg. 2011-10-31
# 1: mm-dd-yyyy      eg. 10-31-2011
# 2: dd-mm-yyyy      eg. 31-10-2011
# 3: dddd, MMMM dd   eg. Monday, October 31
# 4: MMMM dd, dddd   eg. October 31, Monday
# Number: 0, 1, 2, 3, 4
# Mandatory
P102 = 0

# Time Display Format. 0 - 12 Hour, 1 - 24 Hour
# Number: 0, 1
# Mandatory
P122 = 1

##############################################################################
##  Settings/Web Service
##############################################################################

# Weather Update
# Enable weather update. 0 - No, 1 - Yes. Default is 1
# Number: 0, 1
# Mandatory
P1402 = 0

# City Code
# 0 - Use Self-Defined City Code, 1 - Automatic. Default is 1
# Number: 0, 1
# Mandatory
P1405 = 1

# Self-Defined City Code
# String
P1377 =

# Update Interval (in minutes). Default is 15
# Number: 5 - 360
# Mandatory
P1378 = 15

# Degree Unit. auto - Automatic, f - Fahrenheit, c - Celsius. Default is auto
# String: auto, f, c
# Mandatory
P1379 = c


##############################################################################
##  Settings/XML Applications
##############################################################################
# Enable Idle Screen XML Download
# 0 - No, 1 - YES, HTTP, 2 - YES, TFTP, 3 - YES, HTTPS. Default is 0
# Number: 0, 1, 2, 3
# Mandatory
P340 = 0

# Download Screen XML At Boot-up. 0 - No, 1 - Yes. Default is 0
# Number: 0, 1
# Mandatory
P1349 = 0

# Use Custom File Name. 0 - No, 1 - Yes. Default is 0
# Number: 0, 1
# Mandatory
P1343 = 0

# Idle Screen XML Server Path
# This is a string of up to 256 characters that should contain a path to the XML file
# It MUST be in the host/path format. For example: directory.grandstream.com/engineering
# String
P341 =


#------------------------------------------------------------------------------------- 
# Line Keys
#------------------------------------------------------------------------------------- 
# Line Key 1
# ------------------------------------------------------------------------------------
# Key Mode. Default is 0
# 0 - Line ,1 - Shared Line, 10 - Speeddial, 14 - Speeddial via active account, 15 - Dial DTMF
# 16 - Voicemail, 17 - Call Return, 18 - Transfer, 19 - CallPark, 20 - Intercom, 21 - LDAP Search
# Number: 0, 1, 10, 14 - 21
# Mandatory
P1363 = 0

# Account. 0 - Account 1, 1 - Account 2
# Number: 0, 1
# Mandatory
P1364 = 0

# Name. Max length allowed is 32 characters.
# String
P1465 =

# User ID. Max length allowed is 64 characters.
# String
P1466 =

# Line Key 2
# ------------------------------------------------------------------------------------
# Key Mode. Default is 0
# 0 - Line ,1 - Shared Line, 10 - Speeddial, 14 - Speeddial via active account, 15 - Dial DTMF
# 16 - Voicemail, 17 - Call Return, 18 - Transfer, 19 - CallPark, 20 - Intercom, 21 - LDAP Search
# Number: 0, 1, 10, 14 - 21
# Mandatory
P1365 = 0

# Account. 0 - Account 1, 1 - Account 2
# Number: 0, 1
# Mandatory 
P1366 = 0

# Name. Max length allowed is 32 characters.
# String
P1467 =

# User ID. Max length allowed is 64 characters.
# String
P1468 =