Mosaic of system administration

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== MSX-EQ PSG Spectrolyzer for MSX ======

{{:msx:msx-eq:msx-eq.jpg|}}


~~TOC_HERE~~
~~TOC wide~~

Developer: Pyhesty [RBSC]. Copyright (C) 2022

Русская версия находится здесь: [[msx:msx-eq:|]]

The MSX-EQ PSG Spectrolyzer is a simple cartridge for the MSX platform that visualizes the spectrum of notes played by the programmable sound generator, such as the AY-3-8910 or YM2149 (PSG). The cartridge board is intended for the standard MSX cartridge slot. The board shows the effect of measuring the signal's level, in which each reproduced frequency (or frequency
range) corresponds to one of 9 vertical LED indicators.


The MSX-EQ cartridge is based on the PLD Altera EPM7128, that has 128 logical units. The PLD intercepts PSG port I/O, identifies
the played note/frequency and displays its representation on the dedicated LED indicator. The cartridge doesn't need any special
setup. It can be installed into any standard MSX slot that allows an unobstructed view of the cartridge's LED indicators.

The cartridge visualizes the played notes/frequencies in games and demos in real time. After a note/frequency fades out, the LED indicators automatically switch off.

The cartridge may be assembled in 2 different ways:
  - With discrete LED elements - simple, but allowing various color combinations
  - With LED assemblies - the so-called "bars", mostly single-colored
The following color combinations are possible (those were tested and were found suitable for the project, however other color combinations are possible):
  * One color LEDs or LED assemblies: blue, red or green
  * Multi-colored LEDs or LED assemblies: blue with red or green with red (red LEDs are placed on top)

====== Circuit ======

{{:msx:msx-eq:schematics.jpg|}}

Front side of the PCB: \\ {{:msx:msx-eq:msx-eq_board.png?600|}}

{{:msx:msx-eq:msxeq_3_2.zip|Gerber format files}}

All parts for assembling the MSX-Eq cartridge can be purchased from varios sellers on AliExpress:
^Part^Value ^Count^Note^
|C1..C6|100nF|6|C0805|
|C7..C8|47uF 10v|2|CPOL-EUSMCB SMC_B|
|DA1..DA9|LEDs|9|2010BB DIP-8|
|D1|EPM7128STC100|1|TSOP-100|
|R1..R37|1k|37|R0805|
|XP2|PLD10|1|PIN-10|
|MSXSLOT|EDGE-CONNECTOR|1|50-pin slot|

----

[[aliexpress>item/1005003644790122.html?item_id=1005003644790122&sku_id=12000026630013019&spm=a2g39.orderlist.0.0.6f0f4aa6xX9nSz|LED assemblies]]

====== Firmware uploading ======

The freshly-assembled MSX-EQ cartridge needs the firmware to be uploaded into the PLD chip. For updating/uploading the firmware into the cartridge you will need:
  - [[en:quartus_ii:quartus_ii#quartusiiweb150|Quartus II Web Edition (Free) 15.0]] software
  - Byte Blaster or USB Blaster programmer (can be purchased on Ebay or AliExpress)

The procedure is simple — supply 5v onto the cartridge board, connect the USB Blaster to the JTAG connector's placeholder (mind the orientation of the connector!). Auto–detect the Altera chip with Quatrus software and then upload the POF file from the "Firmware" folder into the PLD chip.

<WRAP center round important>
If the LED assemblies with inverted polarity were used to assemble the cartridge, please use the "MSX_EQ_inv_led.pof" firmware instead of the standard one.
</WRAP>

====== Cartridge case======

Any factory-made MSX cartridge manufactured from semi-transparent or transparent plastic is suitable for the MSX-EQ cartridge board.

For example, the following quality MSX cartridge cases can be obtained from Overrich (South Korea) and Retro Game Restore (Taiwan):
  * https://retrogamerestore.com/store/msx_cart_shell/
  * https://www.msx.org/news/en/black-white-and-transparent-msx-cartidge-cases-overrich
Also, there's a 3D model of the cartridge case. The case should be printed with semi-transparent filament.

3D model of the cartridge case files:
  * {{:msx:msx-eq:case_top.stl|Top}}
  * {{:msx:msx-eq:case_bottom.stl|Bottom}}

====== Visual Effects ======

You can check how the cartridge visualizes various PSG effects by watching these videos:
  * [[https://youtu.be/E50GIDputWo|Games]]
  * [[https://youtu.be/SXDI22wPhJE|Demo 1]]
  * [[https://youtu.be/Vhv5bKJgaLk|Demo 2]]

====== Disclaimer ======

All files of the MSX-EQ project are available in the RBSC's Github repository:  [[github>RBSC/MSX-EQ|here]].

[[rbsc>en/completed_projects/#msx-eq|Link to the official website]]

<WRAP center round important 100%>
The RBSC provides all the files and information for free, without any liability. The provided information, software or hardware must not be used for commercial purposes unless permitted by the RBSC. Producing a small amount of bare boards for personal projects and selling the rest of the batch is allowed without the permission of RBSC.

When the sources of the tools are used to create alternative projects, please always mention the original source and the copyright!
</WRAP>

====== Links ======

[[msxorg>forum/msx-talk/hardware/msx-eq-psg-equalizer-viewer|Discussion on msx.org]]

[[msxorg>news/en/new-flashy-project-from-rbsc-msx-spectrolyzer|MSX Spectrolyzer - New flashy project from RBSC]]

{{tag>MSX-en MSX_Cartridge-en RBSC-en on_github-en}}
Mosaic of system administration

User Tools

Site Tools

Page Tools
