====== APCUPSd: apctest ======
FIXME

apctest — программа из пакета [[apcupsd:apcupsd|APCUPSd]], предназначена для настройки, калибровки ИБП.

====== Запуск ======

===== Linux =====

<code bash apcupsd_test.sh>
#!/bin/sh

service apcupsd stop
apctest
service apcupsd start
</code>


===== MS Windows =====

<code cmd apcupsd_test.cmd>
net stop apcupsd
apctest.exe
net start apcupsd
</code>

====== Изменение даты замены батарей ======

Здесь описаны действия которые нужно выполнить, чтобы изменить дату замены батарей ([[apcupsd:status#BATTDATE|BATTDATE]]).

<code>
Checking configuration ...
Attached to driver: apcsmart
sharenet.type = Network & ShareUPS Disabled
cable.type = Custom Cable Smart
mode.type = APC Smart UPS (any)
Setting up the port ...
Doing prep_device() ...

You are using a SMART cable type, so I'm entering SMART test mode
Hello, this is the apcupsd Cable Test program.
This part of apctest is for testing Smart UPSes.
Please select the function you want to perform.

1) Query the UPS for all known values
2) Perform a Battery Runtime Calibration
3) Abort Battery Calibration
4) Monitor Battery Calibration progress
5) Program EEPROM
6) Enter TTY mode communicating with UPS
Q) Quit

Select function number: 5

</code>

<code>
This is the EEPROM programming section of apctest.
Please select the function you want to perform.

 1) Print EEPROM values
 2) Change Battery date
 3) Change UPS name
 4) Change sensitivity
 5) Change alarm delay
 6) Change low battery warning delay
 7) Change wakeup delay
 8) Change shutdown delay
 9) Change low transfer voltage
10) Change high transfer voltage
11) Change battery return threshold percent
12) Change output voltage when on batteries
13) Change the self test interval
14) Set EEPROM with conf file values
 Q) Quit

Select function number: 2

Enter new battery date -- DD/MM/YY: 

Attempting to update UPS battery date ...
</code>


{{tag>Hardware UPS APC Linux MS_Windows}}