This is an old revision of the document!
Разработчик: Pyhesty [RBSC]. Copyright (C) 2022
Русская версия находится здесь: MSX-EQ PSG Spectrolyzer для платформы MSX
The MSX-EQ PSG Spectrolyzer is a simple cartridge for the MSX platform that visualizes the spectrum of notes played by the programmable sound generator, such as the AY-3-8910 or YM2149 (PSG). The cartridge board is intended for the standard MSX cartridge slot. The board shows the effect of measuring the signal's level, in which each reproduced frequency (or frequency range) corresponds to one of 9 vertical LED indicators.
Возможны две версии исполнения картриджа:
Возможны следующие цветовые решения, которые были нами опробованы и дали хороший визуальный эффект (также возможны и другие цветовые решения):
Картридж MSX-EQ создан на базе PLD Altera EPM7128, состоящей из 128 логических блоков и регистров. PLD анализирует запись в порты звукового генератора, вычисляет соответствующую ноту (частоту) и визуализирует её на соответствующем светодиодном индикаторе. Картридж не требует никаких дополнительных настроек. Он устанавливается в любой свободный MSX слот, позволяющий иметь хороший обзор верхней передней части картриджа (там расположены индикаторы). При проигрывании музыки, например в играх или демонстрационных программах, картридж в режиме реального времени визуализирует спектр используемых частот (нот). После завершения музыкальной композиции индикаторы гаснут автоматически.
Лицевая сторона печатной платы:
Обозначение | Номинал/марка | Количество | Примечание |
---|---|---|---|
C1..C6 | 100nF | 6 | C0805 |
C7..C8 | 47uF 10v | 2 | CPOL-EUSMCB SMC_B |
DA1..DA9 | LEDs | 9 | 2010BB DIP-8 |
D1 | EPM7128STC100 | 1 | TSOP-100 |
R1..R37 | 1k | 37 | R0805 |
XP2 | PLD10 | 1 | PIN-10 |
MSXSLOT | EDGE-CONNECTOR | 1 | 50-pin slot |
Any factory-made MSX cartridge manufactured from semi-transparent or transparent plastic is suitable for the MSX-EQ cartridge board.
For example, the following quality MSX cartridge cases can be obtained from Overrich (South Korea) and Retro Game Restore (Taiwan):
Also, there's a 3D model of the cartridge case in the repository. The case should be printed with semi-transparent filament.
You can check how the cartridge visualizes various PSG effects by watching these videos:
All files of the MSX-EQ project are available in the RBSC's Github repository: here.
The RBSC provides all the files and information for free, without any liability. The provided information, software or hardware must not be used for commercial purposes unless permitted by the RBSC. Producing a small amount of bare boards for personal projects and selling the rest of the batch is allowed without the permission of RBSC.
When the sources of the tools are used to create alternative projects, please always mention the original source and the copyright!